C.Scope CXL4 engineering network locator

The basic model of the new four series of C-Scope locators.

In stock 2 pcs
Delivered the day after tomorrow
Free shipping
Price without VAT: €823.23

C.Scope CXL4 is a new ultra-modern and high-performance utility locator. The entire XL range has been designed to set a new standard in the industry. CXL4 is the basic model of the new four series. It differs from the CXL4 D and CXL 4 DGB only in that it cannot record data and does not work with GPS . The locator combines all the C.Scope technologies used so far, but brings a number of new ones. In addition, the locator is literally loaded with new features that allow the operator to find more, faster and without errors.
The CXL locator is equipped with a powerful signal processor. Advanced software helps the device use the power for perfect detection even in areas where it used to be a problem. (cores of historic settlements, etc.). The addition of a new simultaneous use of 33 kHz and 131 kHz helps to significantly improve detection in telecommunications such as sheathed optical conductors, etc.


Power mode - to search for live wires
Radio Mode - basic mode for searching all types of networks
Generator Mode - Combined 33kHz and 131 kHz (combined use significantly improves network detection)
Scan Mode - combines all modes together
Automatic interference suppression - no electromagnetic interference will affect your work
Dynamic motion sensor
Automatic daily locator test
Optional data logging from all locator activities
High resolution LCD
Automatic calibration, no adjustment and no regular service checks
Three-year warranty


The CXL4 has four detection modes that you choose according to what and where you want to search. Each mode has its specific uses and benefits:

POWER mode: is designed to search for live electrical wires. The mode works based on the mains frequency.
RADIO mode: detects all networks using a very precise passive coil inside the locator. Electromagnetic radiation is induced on all metal engineering networks. Thanks to this, you are able to aim all such nets very precisely up to a depth of 2 meters.
GENERATOR mode: used to detect 33kHz and 131 kHz signals applied to the searched network using the SGA4 or SGV4 generator. The combination of high frequency with a 33 kHz signal makes it possible to perfectly detect even wires with a very small diameter. Generator mode is also used when working with C.Scope probes when laying out non-metallic pipes.
ALLSCAN mode: detects all frequencies and all types of signals. With this mode, you can detect unusual signals that may appear in the frequency gaps between the conventional Power, Radio and Generator modes, and is mainly used in the final inspection before excavation.

Human error often contributes to the fact that an engineering network may not have been correctly identified. The new CXL4 D locator tries all these possibilities, when the operator can make a mistake. The Dynamic swing sensor function and the daily automatic test are used to reduce the possibility of error. The ability to log data can also provide invaluable feedback to your employees' workflows. You will be able to easily identify their professional shortcomings and need to solve them with subsequent additional training.

Dynamic motion sensor : If it turns out that the operator with the locator is "swinging" too much during work, a warning tone sounds. This will help you to keep the right search technique constant.

Automatic Daily Test (ADST) : The CXL4 has comprehensive proprietary test circuits. ADST tests the locator every day when it is first turned on, including the receiving antennas. This test can be saved and the operator with the locator is always sure that his device is in perfect order and in optimal condition for use.

LCD : The CXL4 D has a large, clear and easy-to-read backlit LCD display mounted behind a protective polycarbonate lens. The display shows the detection mode, peak signal level, signal strength and battery status

Detachable speaker : The speaker can be easily detached for use in noisy work environments, where the use of headphones could easily cause an accident at work. The loudspeaker can be attached to the head using a twisted pair.

Robust and durable construction : The CXL4 is robust yet very light. It uses the construction of two walls. The locator also meets IP 65 protection against ingress of dust and water.

CALIBRATION : The CXL4 does not require regular re-calibration, which reduces operating costs.

SERVICE : C.Scope provides complete service throughout the EU. The service for the Czech and Slovak Republic is provided by the company Marek Mlejnský, production service and sale of metal detectors.

WARRANTY : The CXL4 comes with a three-year warranty


Manufacturer Part No : CXL4 LOCATOR

• 720mm x 280mm x 65mm
• 2.6 kg incl. battery . 2.4 kg without. battery
• 8 x "AA (LR6) 40 hours intermittent use at 20 ° C. Compatible with NiMH rechargeable batteries
Temperature range
• 20 º C to +50 º C
The device has IP65 protection and CE certificate

You have added item to the shopping cart ×

↑ Nahoru + Zobrazit další nabídky

Back to top