Metal detector Nexus Standard MP V2

The Nexus Standard MP V2 detector is designed for professional searchers who want to achieve the maximum possible result in the places they go. The device is not recommended for beginners, but on the contrary for searchers who already have experience with searching and metal detectors. Nexus The MP does not use any automatic functions, everything is subordinated to maximum performance, stability no matter what the ground conditions are, and sensitivity to even the smallest targets.

Key technologies

What is MP? The abbreviation refers to the detector's ability to operate even in extreme mineral conditions. This is achieved through the new SDT (Super Dumping Technology) which enables highly effective mineral suppression. SDT also represents another key feature whereby by using the natural conductivity of the ground, the detector is able to increase the range so that the range in soil is always greater than in air. The manufacturer's measured difference between tests in air and in soil is approximately 14% which is quite extraordinary.

The MP standard is highly temperature resistant and temperature does not affect the results in the field. Turbo audio brings the amplification of the weakest audio signals to a level as if you had them directly under the probe. Salty beaches or identifying large deeply buried iron targets are no problem either.

Key Features

• Perfect stability in all soil conditions.
• Achieves extreme ranges in the worst soil conditions.
• Will always correctly identify large iron targets regardless of depth of deposition.
• Can work in sites full of ferromagnetic rocks and achieve exceptional depth ranges.

All models Nexus currently in production have received very significant modifications to all audio modes. To be specific, the audio has been given a much greater range. The new dual mode with audio threshold control is really impressive. There's also been a tweak in the form of a switchable amplifier, where you'll be able to amplify the signal sound as if it were on the surface with a dial under the handle.

The detector also includes a probe cover!

The new Nexus Standard MP features extremely fast auto-tuning and inductive balance tuned (99%) search probes. Thanks to the original Nexus technology, the detector thus has an excellent range and very accurate discrimination, which is not possible to achieve in current scientific conditions.

Features of the detector

• New 2D High Energy probes using transmitters at 124 volts. The new probes also have a much longer lifetime than all resin based coils.
• New Auto function - this controls the threshold tone, discrimination and ground balance. So you have no problems with the settings!
• New Bi-colour DDM indicator working on LED technology. It uses two colours, red for non-ferrous targets and blue for ferrous.
• New Silent Motion filtering mode - designed to remove all unwanted objects
• New highly durable three-piece construction

Controls

• Volume in combination with device switching
• Sensitivity
• Discrimination
• Ground Balance - ground effect tuning with controller position lock
• Dual Tone with adjustable frequency
• Coarse adjustment for mineralisation control
• Fine adjustment of mineralisation control, with controller position lock
• Mineralization mode switch
• Battery test
• Audio Mode switch. Changes the operation of the detector between three basic modes of operation: Standard, Iron Filtering and Turbo Audio.

Technical parameters

• Operating frequency: 6 to 18 kHz
• Applicable probe types: 2D and double concentric probes
• Detector weight (without probe): 1.0 kg
• Probe construction: ABS and fiberglass
• Audio: fully adjustable
• Audio output: 6 mm stereo jack
• Power supply: 15V (10 AA alkaline batteries)
• Operating modes: All-Metal, discriminative and automatic.
• -15° to +60° C. Optimal operating temperature.
• Optimal humidity: 0 to 85%
• The detector is equipped with a new 13" (33cm) 2D probe
• NEW REDESIGNED ELECTRONICS

All detectors are made to order. Production lead times range from 3 to 6 weeks depending on production workload. When ordering for production, you can choose from a range of options which probe the instrument will be fitted with. Additional coils can also be ordered.

As this is a special custom production, orders must be placed in writing or by phone at info@lovecpokladu.cz or + 420 731 102 713. In addition, it is definitely worthwhile to discuss the entire configuration and purpose of the detector precisely.

Prices of individual variants in the detector in Euro. Payment in CZK is of course possible according to the current exchange rate.

MP V2 DD 10" 7 kHz .... 1656 Euro
MP V2 DD 13" 6 kHz .... 1764 Euro
MP V2 DD 20" 5.7 kHz .... 2074 Euro
MP V2 Silver Scout 9" 24 kHz .... 1625 Euro
MP V2 Silver Scout 11,5" 24 kHz .... 1685 Euro
MP V2 Dual 2x20" 5,7 kHz .... 2895 Euro
MP V2 Dual 2x31" 5,7 kHz .... 3777 Euro

Additional coils can also be ordered with the detector. Their prices in Euro:

10" 7 kHz .... 385 Euro
13" 6 kHz .... 485 Euro
20" 5.7 kHz .... 795 Euro
Silver Scout 9" 24 kHz .... 365 Euro
Silver Scout 11,5" 24 kHz .... 445 Euro
Dual 2x20" 5,7 kHz .... 1495 Euro
Dual 2x31" 5,7 kHz .... 2377 Euro