Minelab E-Trac MD Link metal detector
Action Set of Minelab E-Trac Plus metal detector and MD Link wireless receiver and transmitter
With the Minelab E-Trac plus metal detector you now get:
The Minelab E-Trac metal detector is the most advanced detector from Minelab , which uses FBS broadband technology. The detector is characterized by a rigid but lightweight construction. The most modern materials such as carbon fibers were used in its construction. The control box has intuitively placed controls and a large, high-resolution LCD for working in all lighting conditions. The possibility of backlighting is a matter of course.
With the E-Trac detector, you also have the opportunity to connect your device to a personal computer for the first time in the history of the hunting detector. This allows you to upload detector settings, discrimination, etc. The package also includes original software for working with E-Trac on your PC.
Minelab E-Trac uses a brand new, 32-bit processor operating at 40MHz. The detector has thus accelerated significantly and its response with its speed begins to resemble analog devices.
His work in extremely mineralized soils is highly impressive. Examples are wet sea beaches or the seawater search itself. In Czech conditions, however, the most important stability is when working on highly magnetic rocks (eg basalt in the Bohemian Central Mountains). These places were and still are a field for pulse detectors , which do not have discrimination. E-Trac seems to be changing this practice.
Technology used
Minelab E-Trac works with FBS broadband technology in the range from 1.5kHz to 100kHz. The signal received from the subject is analyzed by a wide range of responses. As a result, you have the opportunity to see and hear the characteristics of the signal (object) - their surface conductivity and iron content. The result of the technologies and functions used is a further shift in the range of the hobby metal detector, high sensitivity of the device, less susceptibility to interference and accurate signal identification.
Technical specifications | |
Transmission technology | FBS (Full Band Spectrum) multi-frequency technology |
Microprocessor | 32bit, 48MHz microprocessor - fast and powerful |
Connections | USB connector for communication with PC |
Software | Intuitive user interface; Quick goal evaluation; Multilingual functionality |
Quickmask | Quick and easy control of discrimination |
Depth Gauge (depth gauge) | Accurate measurement active in Normal search and in Pinpoint mode |
Noise Cancel | Automatic or Manual selection from 11 channels |
Pinpoint | Non-motion with modulated audio and visual cursor on LCD; 2 modes - Normal and Sizing (size) |
User modes | 4 factory modes and 4 personal modes |
Discrimination | 2 dimensional Smartfind Discrimination |
Target identification | 2 dimensional Smartfind Size / Conductivity and Iron conductivity characteristics 1-50, Iron 1-35 |
Sensitivity setting | Fully automatic; Manual setting 1-30 |
Degree of sensitivity | Automatic level; Manually set level; Recommended level |
Threshold | Fine adjustment of the threshold tone level from 1-50 |
Audio Response | 4 settings: Normal, Long, Smooth, Pitch Hold |
Test ID value of tones | 1,2,4 and Multitone, customizable Conductivity or Iron responses |
Audio ID variability | 30 setup steps for better target identification |
Speed of coverage | Selection from Fast / Deep |
Trash Density | Low in areas with separate finds or High in areas with a high incidence of waste. |
Ground Balance Modes | Automatic soil compensation - advanced digital filtering |
Ground Settings | "Neutral" for most soil conditions, "Dificult" for mineralization |
Coil (probe) | Ultra light 11 "DD waterproof coil |
Battery | 1600mAh NiMH or Alkaline batteries |
Low battery audible alarm | Audio and visual indications |
Display | Large 3.4 "(8.65 cm), grayscale LCD panel with contrast adjustment and backlight |
Headphone input | ¼ "100Ω Stere Jack |
Patents | US4890064; US5537041; US5506506 |
Accessories included in the price of the detector
1. 11 ”probe cover
2. Electronics box cover
3. Instructional DVD
4. Koss UR 30 headphones
5. Battery block 1600 mAh NiMH
6. Charger
Recommended accessories from Minelab
- 8 "FBS probe
- 8 "probe cover
- Battery block 1800mAh NiMH
- Extended bottom bar
- Bag
- Waste pocket
- Car Charger
Technology from Minelab
Treasure Hunter is a distributor and the only authorized service center of Minelab in the Czech and Slovak Republics
We provide all warranty and post-warranty service of all Minelab , regardless of where the metal detector was purchased.
To claim the guarantee, you only need to provide a valid tax document.