Minelab Gold Monster 1000 metal detector
New special detector for natural gold and smallest metal targets
Charger, headphones, scoop and other accessories
A special detector designed to search for natural gold and small metal targets. The big advantage of the 1000-inch is the absolute ease of operation. It is much to know that the detector is designed so that no African search engine has a setup problem. The high operating frequency combined with the fast detector processor delivers literally dreamy sensitivity and depth of reach, especially for the smallest gold targets.
1. Discrimination of the detector is absolutely great. It is something extraordinary and absolutely unexpected for a device with such a high operating frequency.
2. Two tone resolution in discriminatory mode is very pleasant and unambiguous
3. Although the detector is designed primarily for the smallest targets and gold and operates at a really high operating frequency, the overall range was not bad at all.
When comparing detectors, the three curves in the diagram represent the ability of each detector to find small gold nuggets of a certain size at the maximum possible depth. Most detectors will find large nuggets just below the surface, but the detector's sensitivity determines how many smaller nuggets will eventually be found in heavy (heavily mineralized) soils and at greater depths.
1. Non-ferrous metals (gold) | Iron |
2. Detection modes - discriminatory | All Metal |
3. Sensitivity adjustment | |
4. Adjust the volume | |
An 18 kHz detector will have an in-depth advantage in finding nuggets ≥ 1.0 g over conventional mid-range instruments. A 71 kHz detector will have an in-depth detection advantage of ≤ 0.1 g. The highly advanced GOLD MONSTER 1000 uses a 45 kHz “mid” frequency and a high-speed 24-bit processor. This primary combination significantly increases the sensitivity to gold, which is beyond the reach of the other one frequency VLF detectors in a wide range of nugget sizes without causing excessive noise and false signals.
Use
In our conditions, the usage of the 1000pcs is a bit limited. There is relatively little natural gold. Nevertheless, I would like to say that Gold Monster could become a perfect helper for archaeologists. The device does not miss even the smallest particles of metal and its maneuverability is such that it can be taken by virtually anyone and go immediately to work. The reach of classic objects in discriminatory mode is average (on the MH polygon 2h RU 22 cm), because the detector is designed for searching the smallest targets, so basically a greater range and a bit undesirable. In All Metal mode, the range increases by about 30%. However, the color / iron resolution only takes place on the LCD. All targets will sound the same in All Metal.
Functions and features
Fully automatic operation
Extra sensitive power of 45 kHz VLF
Highly customizable
2 search coils included
Easy quick start
Key features: Automatic interference suppression • Digital electronics • Automatic soil balance • Faster processor • Automatic sensitivity
- Technology - Ultra wide 45kHz VLF dynamic range
- Working modes - Gold (rejection of iron), Deep All-Metal
- Discrimination - Yes
- Ground Balance GB - Automatic
- Interference Suppression - Automatic (Startup)
- Sensitivity adjustment - Manual (1-10), Auto (11), Auto + (12)
- Adjusting the Volume - Manual 1-6
- Visual Display - Monochrome LCD
- Detector length - 1382 mm-944 mm (54.4 "-37.2")
- Detector weight (with 10 "× 6" coil) - 1.33 kg
- Audio Output - Internal 3.5mm (1/8 ") Speaker or Headphone
- Coils (standard) - GM 10 (10 "x 6" 2D), GM 05 (5 "2D)
- Splash-proof - coils are waterproof up to 1m, rain / splash-proof control box
- Battery options - Li-Ion (included), 8 × AA batteries (not included)
- Warranty: 2 years