Pinpoint (motionless tracking mode)

Pinpoint mode (often referred to as motionless tracking mode) is a special feature in modern metal detectors that is used to pinpoint the exact position of a detected metal object in the ground. Unlike normal detection mode, where coil movement above the ground is required for the detector to generate a signal, Pinpoint mode allows metal detection without coil movement, making it easier to accurately track the target.

How Pinpoint mode works:

1. Motionless mode activation: In normal detection mode, constant coil movement above the ground is required for the detector to detect metal objects. However, once the detector indicates the presence of metal, the user can switch to Pinpoint mode, in which the detector also responds to the static position of the coil. Pinpoint allows the detectorist to hold the coil in one place and precisely target the metal object.

2. Increasing signal strength: Pinpoint mode usually works by making the detector emit a higher and more intense tone the closer the coil is to the center of the object. This allows the center of the metal object to be accurately located underground. Once the coil passes over the closest point above the target, the audio signal is strongest, helping the user to pinpoint the exact location of the object.

3. Reduce the area to dig: In normal detection mode, the find can only be located approximately, resulting in the need to dig a wider hole to locate the object. Pinpoint mode allows you to narrow the detection area, making digging more efficient and reducing the amount of disturbed ground. This is especially important if you are looking for small targets or if you want to minimize ground disturbance.

When and why Pinpoint mode is used:

1. After detecting a target in normal mode: Once the detector indicates the presence of metal, the user typically switches to Pinpoint mode to more accurately locate the target before digging. This helps to minimize the time spent searching for the object and reduce the size of the area to be excavated.

2. When searching for smallobjects, such as coins, rings or small artifacts, pinpointing is especially important. Pinpoint mode allows you to efficiently locate these small objects without the need for extensive digging.

3. Use in densely built-up or vegetated areas: Pinpoint mode is useful in places where digging larger pits would be difficult or undesirable (for example, in places with dense vegetation or in urban areas). Accurate target tracking allows smaller and more precise excavation, minimising disruption to the surrounding environment.

4. Locating deeper targets: For deeper targets, it may be more difficult to pinpoint their location by motion detection mode alone. Pinpoint mode helps to better estimate exactly where to dig without having to uncover a large area of ground.

Benefits of using Pinpoint mode:

1. Reduce the digging area: instead of guessing where the target is, Pinpoint allows you to pinpoint the exact location of the metal, reducing the need to dig larger holes and saving time and energy.

2. Pinpoint mode is particularly useful when searching for small metal objects that may otherwise be easily missed or mislocated.

3. More accurate work in difficult conditions. Archaeological sites), Pinpoint is invaluable because it allows the target to be targeted with minimal surface disturbance.

4. More efficient target identification: Pinpoint mode helps not only in locating but also in estimating the size of the target. For example, long or large objects emit a signal over a larger area, while small objects have a localized signal. This can help distinguish whether the target is small or a long iron bar.

How Pinpoint mode works on different types of detectors:

• Analog detectors: Older or basic models of detectors do not have a Pinpoint feature, and users are often left to manual methods of swiping the coil from all directions to narrow the area of the find.

• Modern digital detectors: most of today's detectors, especially mid-range and higher, have an integrated Pinpoint mode. With these devices, all you have to do is press a button, and the detector goes into a motionless mode in which you can accurately track the target.

Summary:

Pinpoint mode is a key feature that is used to accurately track a metal target after it has been detected by the normal motion mode. It provides more accurate object localization, which reduces the need to dig large holes, saves time, improvesIt improves search efficiency and provides the ability to better target small objects or objects in challenging conditions. Metal detectors equipped with this feature are much more practical and efficient, especially when searching for small or deeply buried objects.

Related terms